Teardrops n Tiny Travel Trailers

by **Vedette** » Mon Dec 26, 2011 10:22 pm

Please show me your cantalever tables and removable counter tops!
Good Roads
Brian

by **bobhenry** » Tue Dec 27, 2011 8:13 am

Made this set for the chuck wagon and added a mount so they can also be used on the 4x7 teardrop!

http://www.tnttt.com/viewtopic.php?t=43504&highlight=tables

Here's Cliff's

by **bobhenry** » Tue Dec 27, 2011 8:36 am

My barn got a mini counter installed

by **bobhenry** » Tue Dec 27, 2011 8:38 am

Chubby has a self storing flip out.....

by **gregp136** » Tue Dec 27, 2011 8:44 am

by **parnold** » Tue Dec 27, 2011 8:44 am

by **Nobody** » Tue Dec 27, 2011 10:38 am

I have mounted an additional 'rail' on the opposite side of the TD so this table can be used there also; if I ever find another piece of 'scrap' 3/4" birch ply I'll make an additional table for that side...

This table 'base' is hinged to the sidewall of the galley, & table folds up for storage/travel

by **bobhenry** » Tue Dec 27, 2011 11:05 am

Giving credit where credit is due, here's Becca's side table dish washing center......

I stole this idea and added the recessed tubs with covers so I could use it as a smooth counter when needed.

by **Moho** » Tue Dec 27, 2011 11:28 am

Bobhenry, there is a lot of people in the world limping around due to your builds, lol. Walkers, crutches...looking for canes and wheelchairs in your next build :lol:

by **bobhenry** » Tue Dec 27, 2011 12:15 pm

you forgot the post about handicap shower seats for a cooled stand...... :laughter:

by **droid_ca** » Tue Dec 27, 2011 12:22 pm

these look like a quick and fun build that will be very practical for any type of trailer

by **Wolfscout** » Tue Dec 27, 2011 9:41 pm

hrm I have a sink

and a table.... that mounts over my tongue/deck

I have and idea for one that mounts on my rear barn style door that will hold a clothes rack based on the same thing as my sink. chuckles.

by **Kharn** » Fri Dec 30, 2011 12:49 pm

bbarry's slide-out/fold-out idea from his build thread:

Nobody:
In your second picture, how does that supporting rod anchor to the trailer?

by **schaney** » Fri Dec 30, 2011 1:11 pm

There are still some of the Thule RV ones floating around.

I normally make them out of 1/2" baltic birch with a 1x1 strip around the edges attached with a mating track.

by **Nobody** » Fri Dec 30, 2011 10:41 pm

Kharn wrote:bbarry's slide-out/fold-out idea from his build thread:

Nobody:
In your second picture, how does that supporting rod anchor to the trailer?

I just have a hole drilled in the siding (sealed w/epoxy) & a matching hole in the support, place a 5/16 bolt thru the holes, remove & store in galley box when not in use. The support rod is hinged to the bottom of the table.

Teardrops n Tiny Travel Trailers

Cantalever Tables

Cantalever Tables

Who is online